FALK & REXNORD

Falk grid steelflex coupling

Falk grid steelflex coupling
Falk Gear coupling Reducer Indonesia
Falk Gearbox Wrapflex

ONE RELIABLE DRIVE
For more than 100 years, the Falk" name
has earned a reputation for delivering the highest value gear drive solutions in the power transmission industry.
The Falk Gearbox Grid SteelFlex Coupling carries on this tradition. Its robust yet elegant design integrates the proven features and benefits of past designs with industry-leading innovations derived from our experience with heavy industry s most demanding applications.

The result is a new standard in drive reliability and a drive with the design and feature sets that make it easy for you to standardize on one platform for all your mid-to-large-size drive requirements.

Rexnord Addax Thomas Disc Coupling Flexing coupling composed of 316 stainless steel hubs, a flexing coupling composed of 316 stainless steel hubs, a polyurethane encased carbon fiber flexible element, and a fully composite, floating, flanged spacer tube used to span distances up to 13, 7 meters between shaft ends.

Floating tube Using continuous strand of fiberglass, carbon/ graphite, or a hybrid
of both, computer piloted winding patterns allow precise control of tube stiffness. Combined with an ultra-violet light stabilized, epoxy resin, significant economies in
mass are gained since the resulting specific modulus is 3, 5 to 5 times that of steel. Lower mass reduces inertia and increases critical speeds so that operating efficiencies in terms of reduced vibration, enhanced safety, and lower bending
moments are possible. The standard composite material used has a corrosion resistance exceeding that of 316 stainless steel and can be formulated for specific
conditions.

There are many ADDAX COUPLING, just use Rexnord Addax Thomas Disc Coupling for your industry!
 

Rexnord Linkbelt bearings roller chain

Rexnord Linkbelt
REXNORD bearings
REXNORD roller chain

Link-Belt® and Rexnord® Linkbelt Roller Chain Bearing Gearbox offers a wide varity of options. Standard roller chain is broadly used in power transmission applications ranging from general industrial applications to demanding oil field service to operation in such specialized areas as food processing and heavy construction equipment. Double-pitch drive chains frequently prove the economical choice for slower speed drives on relatively long centers.

Corrosion resistance—Standard roller chain made of stainless steel provides excellent performance in applications requiring high resistance to corrosive attack. Shock resistance—Link-Belt® SU and Rexnord® Heavy "H" series roller chain provides additional capacity to withstand intermittent shock loading. Features include improved fatigue resistance, thicker sidebars, and heat-treated pins. Extra clearance—Trans-Flex® chain is designed for severe duty applications, such as in transit mixers, crawler drives, and other uses requiring delivery of full power despite recurrent sprocket misalignment. ULTR-O-LIFE™ O-ring roller chain — Uses square cross sectional O-rings to seal in special lube while sealing out dirt, moisture and other contaminants.

Available in 5/8” thru 1 1/4” pitch single pitch series. Runs on standard ANSI sprockets. Side bow roller chain —Extra clearance chain with ability to flex and twist. Ideal for use on curved conveyors or to transmit power under misaligned sprocket conditions. Available in 3/8” to 1” single pitch. Block chain— Used in light load, low speed conveyors. Consisting of block links (solid or laminated) and link plates joined by pins, all block chains are 1” pitch and vary in width of block from 3/16” to 1/2”.

Hollow pin chain— Constructed with special pin links which have hollow pins assembled in the pin plates. This unique design allows easy insertion of cross rods or attachments to preassembled chain at desired spacings. Attachments can be repositioned without removing chain from conveyor. It is available in single and double-pitch with or without Carrier Rollers. REDI-LUBE™ chain —Self-lubricating, heavy walled, oil-impregnated, sintered steel bushings replace bushing and roller of standard ANSI chain. Available in single and double-pitch. British Standard Chains - chains that comply with metric ISO standards .  [ so choose Rexnord Linkbelt Chain Bearing Gearbox ]

Multiflex chains are able to flex in all directions, allowing the construction of conveyors that move products continuously from level to level while conserving floor space through its tight side-flex radius, So pick up this Rexnord Table Top Chain for your machines

Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. Armor-clad cap material is stainless steel. Chain strength is listed at room temperature.